Techinical Specification

PUF panels made of P.P.G.I with 125 mm of PUF insulation purged at a density of 42 kg/cm3 ensuring uniform insulation.

M.S Gussets placed at critical joints for additional strength and durability without adding unwanted weight to the container

M.S subframe with ISMC 125 x 75 x 5 mm thick placed at designed intervals as per load capacity of vehicle.

Heavy duty mudguards and tail light guards with ISMA 40 x 40 ensuring maximum strength and durability.

High quality Die cast Container hinges for longevity and durability welded to the Door frame.

Optional secondary access door for ease of material shifting in case of staggered deliveries and partial material movement.

EPDM rubber gasket which includes 2 stage gaskets, inside P-type Gasket and outside J-type gasket.

Die cast Marine container grade locking arrangement with optional SS locking arrangements also provided.

PUF INSULATED PANEL DETAILS
 
Panel Type “ M “
 

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 
 
“ M “ Type panels are used for making cold stores and walk in freezers. The “ M “ design gives ease of installation as a packaged unit, where the client installs himself. The ground has to be made properly for good contact of PUF foam to foam. Thus giving a better chance for reduction of heat bridge. For all temperatures, these type of panels are used. The end pieces of the room are made to order, thus making it easy for installation and reduction of wastage. The size 1200 mm is reduced as required for the end panel. Cam locks are required for this type of panel, however they can be fitted without if desired. Simple “L” type angle flashings are used to join the panels together.
 
General Technical Details
Working
Temp, deg-C
Recommended
PUF thickness
“ H “
h-1 h-2 Density
Kg / Cubic
Meter
Min
Length
Meters
Max
Length
Meters
“ K “
Value
W/mK
Kcal/mhc Used for
Internal
Wall
Used for
Internal
Roof
+24 to +15 50 mm 25 mm 25 mm 40 - 42 1 4 0.40 0.35 Yes yes
+15 to +4 60 mm 30 mm 30 mm 40 - 42 1 5 0.34 0.30 Yes Yes
+4 to -2 75 mm 37.5 mm 37.5 mm 40 - 42 1 5 0.26 0.23 Yes Yes
-2 to -10 100 mm 50 mm 50 mm 40 - 42 1 6 0.21 0.18 Yes Yes
-10 to -20 125 mm 62.5 mm 62.5 mm 40 - 42 1 6 0.18 0.15 Yes Yes
less than-20 150 mm 75 mm 75 mm 40 - 42 1 7 0.15 0.12 Yes yes